In stock and
ready to ship - while supplies last!
The
Concrete Protector Penetrating Hydrophobic Sealer works just
below the surface by “plugging- up” the concrete
capillaries, preventing water from entering into the
concrete. Instead of a rigid topical sealer, which can be worn
away, this powerful sealer penetrates into the concrete and
provides protection from the inside out, making your surface easy
to clean and maintain year-round. Environmentally friendly, this
sealer protects concrete from damages that can be caused by salt,
chemicals, harsh deicers, freeze-thaw damage, and UV
rays.
Coverage Rates:
425-500 square feet per bottle.
Add to Wishlist
Add to Wishlist
SuperThane is a
clear, UV stable, industrial-grade polyurea topcoat, designed
for use with SANI-TRED products. SuperThane provides world-class
UV, chemical and abrasion resistance with 210% elongation and
7500 psi tensile strength. SuperThane dries tack-free in 1-2
hour when mixed with the supplied Accelerator.
Note: Tire Tracking may occur when
applied too thick.
Add to Wishlist
Add to Wishlist
Urethane - GraniSeal - 2 Gal Kit
Recommended when a thin/medium build clear coat is desired over a color flake or quartz broadcast system. Quick dry time. Excellent chemical resistance, hardness, abrasion resistance, and UV stability.
Two part, fast-setting, industrial
strength, poly hybrid sealer.
Graniseal will not yellow. VOC
Compliant. Recommended for outdoors and areas with good ventilation.
Add to Wishlist
Add to Wishlist
Perfect Poly 90 is a two component
sealer with excellent adhesion, scratch resistance, and UV
resistance. It has been designed for use in areas where VOC limits
(Volatile Organic Compounds) are a concern. (Including California)
Slower pot life and decreased odor compared to other polyaspartic
sealers makes this the ultimate top coat for your project.
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
PermaFlex Accelerator is used in
conjunction with Sani-Tred's Permaflex for faster curing time.
Add to cart
- For fast-setting, use double the recommended amount.
Add to Wishlist
Add to Wishlist
Sealer - Acrylic Diamond Cure and Seal (Diamond Shield 50) - 5 Gal - A
styrene co-polymer in a solvent based sealer 50% solids acrylic sealer
is used on newly stamped or poured concrete. A cure and seal product
that provides moisture retention for a proper hydration for strength gain.
Add to cart
Add to Wishlist
Add to Wishlist
Urethane - Protector Diamond Coat - High-wear top coat with aluminum
oxide for strength with an extremely scratch-resistant finish over top
of Epoxy Neat Coat. Satin finish. Low odor.
Add to cart
Add to Wishlist
Add to Wishlist
PolyHard SL 1/8 - WB Gray (60ft @ 1/8"). Tough as Steel. Industrial and commercial strength urethane slurry flooring system.
Add to Wishlist
Add to Wishlist
Polishing - Stain Guard Sealer - 1 Gal - A semi-penetrating
finishing treatment designed specifically to add stain protection, color
protection, and color enhancement to diamond-polished concrete.
Add to cart
Add to Wishlist
Add to Wishlist
Polishing - Stain Guard Sealer -
5 Gal - A semi-penetrating finishing treatment designed
specifically to add stain protection, color protection, and color
enhancement to diamond-polished concrete.
Add to cart
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Ameripolish EZ
Etch cleans excessive morter, free latent lime, and organic materials
from concrete floors. It opens up the concrete surface to allow
penetrating products to be used like overlay concrete systems, color
stains, densifiers, stain protectors and sealers.
Add to cart
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Ameripolish®
DNS-400 is a sprayable
acrylic sealer that is fast-drying and long-lasting to protect
and beautify concrete finishes. DNS-400 contains complex
additives and acrylics not found in any other sealers to provide
outstanding UV protection, along with fungicides to prevent
mildew growth.
Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to cart
Independent testing has proven DNS-400’s longevity to exceed three years during normal usage conditions, making it ideal for lasting protection on colored or uncolored, stamped or exposed concrete, porous brick, natural or manufactured stone, stucco, slate, unglazed tile, and flagstone.
Add to Wishlist
Add to Wishlist
Recently Viewed Products
600ml Dual Cartridge Every Day Gray Color -12/cs -2# each cartridge -$29.99 each
Match Patch Pro Joint Filler is a two-component, moisture tolerant joint filler. Specifically designed to aesthetically mimic existing concrete and meet the required abrasion resistance for architectural clear sealed and polished concrete flooring.
Add to Wishlist
Add to Wishlist
Sealer - Anti-Gloss Additive - Qt - 1 Qt. for 5 Gal. for Satin Finish or
2 Qts. to 5 Gal. for Matte Finish. For Acrylic sealers.
Add to cart
Add to Wishlist
Add to Wishlist
Allows you to easily add color
to almost any clear solvent - based acrylic sealer and most clear
epoxies. Create endless combinations of tinted sealer stains.
Add to cart
- Completely customizable.
- Each pack contains 32 oz
Add to Wishlist
Add to Wishlist
Categories
- Cement Overlays (3)
- Color Flakes (4)
- Digital Marketing (2)
- Epoxy (17)
- Equipment & Accessories (45)
- Fill & Repair (27)
- Pigments/Metallic Stains (58)
- Printed Materials (6)
- Product Samples (22)
- SANI-TRED® Products (32)
- Scientific Concrete Polishing (36)
- Sealers & Topcoats (23)
- Stains & Dyes (63)
- Tools & Supplies (107)
- Warrior Equipment (14)
- Experts Available To Chat
Copyright 2023 © The Concrete Protector
